Pork Internal Temperature for Chops, Roasts and Ground Pork

What matters: USDA guidance is 145°F (63°C) plus a three-minute rest for whole pork chops and roasts, and 160°F (71°C) for ground pork and sausage.
Content checked: 2026-11-20
Review scope: Source-based general information. No qualified specialist review is claimed. Read our editorial policy.
Food thermometer inserted into the center of a cooked pork chop

Interactive selector: Find the safe internal temperature and thermometer position for your food.

Whole cuts and ground pork use different minimums

Cook whole pork steaks, chops and roasts to 145°F (63°C), then rest them for at least three minutes. Cook ground pork and pork sausage to 160°F (71°C). The difference is about structure, not the animal: grinding can move organisms from the outside throughout the mixture.

A package label or local health instruction can be more specific, especially for prepared products, stuffing or commercial service. Follow it when it requires a higher target. The full meat temperature chart separates whole cuts, ground products, poultry and leftovers.

Pork temperature chart by form

USDA minimums for common pork forms
Pork productMinimum internal temperatureRestProbe location
Chop or steak145°F / 63°CAt least 3 minutesThickest center, away from bone
Tenderloin or loin roast145°F / 63°CAt least 3 minutesCoolest part of the thick center
Fresh ham roast145°F / 63°CAt least 3 minutesThickest meat, away from bone
Ground pork or sausage160°F / 71°CNo separate USDA rest instructionCenter of thickest portion
Leftover cooked pork165°F / 74°CServe after reaching targetSeveral spots in dense food

Find the cold spot in chops and tenderloin

Insert a thin probe from the side of a chop into its thickest center. This keeps the sensing section inside the meat and helps prevent accidental contact with the pan. For a bone-in chop, approach parallel to the bone but do not touch it. Check a second spot when thickness varies.

Tenderloin narrows sharply from head to tail. The thin end can finish earlier than the thick end, so measure the thick section rather than averaging both. A large roast can have more than one cold area. Probe more than one location and use the lowest representative central reading. USDA thermometer instructions specify the thickest part away from bone, fat and gristle.

Rest the whole cut for the full three minutes

The three-minute rest is part of the USDA minimum for whole pork cuts. Start timing after the pork reaches 145°F and leaves the heat. During this interval, internal temperature can stay level or rise as heat moves inward, continuing the process that reduces harmful organisms.

Do not apply the whole-cut rest rule to justify an under-temperature ground pork patty or sausage. Ground pork should reach 160°F in the food. Likewise, a three-minute rest does not replace checking several places in a large or uneven cut. Temperature and time work together only when the stated target has been reached where required.

Pink pork is not automatically undercooked

Modern guidance is based on measured temperature, not the disappearance of every trace of pink. Pork may retain a pink tint after reaching 145°F, and it can lose pink before the center reaches the target. Lighting, curing ingredients, pH and cooking method all affect appearance.

Use the thermometer as the decision tool. If the meat looks unusual, smells spoiled before cooking or has been stored outside safe limits, cooking temperature does not reverse poor handling. Check refrigerator and freezer settings and the food temperature danger zone for storage and holding limits.

Cooking time depends on shape, not only weight

Two pork roasts of equal weight can finish at different times when one is long and narrow and the other is compact. Bone, starting temperature, oven cycling, airflow and pan material add variation. A time-per-pound table is a planning estimate, not proof of doneness.

  1. Estimate time from a reliable recipe for the same cut and method.
  2. Begin checking before the estimate ends.
  3. Probe the thickest center in more than one place.
  4. Remove whole cuts only after the required reading is reached.
  5. Rest whole cuts for at least three minutes before slicing.

Use a thin, calibrated probe. The ice-point calibration check can reveal a meaningful offset before it affects the decision.

Safety questions, answered clearly

What temperature should a pork chop reach?
145°F (63°C) in the thickest part, followed by a rest of at least three minutes.
What temperature should ground pork reach?
Ground pork and pork sausage should reach 160°F (71°C).
Can properly cooked pork still be pink?
Yes. Color is not a reliable temperature measurement, so verify the center with a food thermometer.
Where should I check a bone-in pork chop?
Check the thickest center from the side, close to but not touching the bone.
Does pork need to rest after cooking?
Whole chops, steaks and roasts need at least a three-minute rest after reaching 145°F under USDA guidance.

Sources